Subsea Structures Installation & Hydrodynamics Analysis with ORCAFLEX Level 1 to Level 3
Details
OrcaFlex is the world’s leading package developed by Orcina for the dynamic analysis of offshore marine systems. This powerful course is mostly used as an Offshore & Subsea / Naval engineering software for developing professional subsea pipe design and analysis, floating platform hydrodynamics, mooring lines and riser static and dynamic analysis, among other very important offshore marine system analysis.
Outline
- History of Subsea Engineering
- Subsea Production Systems
- Flow Assurance and System Engineering
- Subsea Structures and Equipment
- Subsea Umbilicals, Risers, and Pipelines
- General Concepts & Field Layout
- Riser System Selection
- Riser Types & Xmas Tree
- Riser System Types
- Types of Buoyancy Devices
- Riser Design Considerations
- Riser Host Vessel Characteristics
- Types of Mooring Systems
- Vessel Motions & Environmental Forces
- Vessel 6 DOF Motions
- Vessel Motion Characteristics
- Riser to Host Connection
- Introduction to flexible pipe
- Material selection & layer function
- Design process & functional requirements
- Local structural cross-section design & analysis
- Global static and dynamic analysis
- Fatigue analysis
- Types of fatigue analysis
- The S/N and T/N curves
- VIV analysis
- Static and Dynamic VIV
- The Wake Oscillator Models
- The VIV properties
- Introduction to the Orcaflex GUI
- Interface buttons and their functions
- Step by step procedure to model a line connected to a vessel
- Run Static Analysis
- Run Dynamic Analysis
- Check and Interpret Results
- Hands On Workshop 1: Free Steel Catenary Riser (SCR) Production Riser Simulations
- Building the Model & Setting General Data
- Hydrodynamics Data Set Up
- Building the Model & Setting Vessel Data
- Building the Model & Setting Line Data
- Clump Weight Attachment & Data Model Setup
- Building the Model & Setting SHEAR 7 Data
- Building the Model & Setting VIVA Data
- Building the Model & Setting All Object Data
- Result Analysis of Steel Catenary Riser (SCR) Production Riser Simulations
- Building the Model & Setting General Data
- Hydrodynamics Data Set Up
- Building the Model & Setting Vessel Data
- Building the Model & Setting Line Data
- Clump Weight Attachment & Data Model Setup
- Building the Model & Setting SHEAR 7 Data
- Building the Model & Setting VIVA Data
- Building the Model & Setting All Object Data
- Result Analysis of 10″ Lazy S Wave Production Riser Simulations
- Building the Model & Setting General Data
- Hydrodynamics Data Set Up
- Building the Model & Setting Vessel Data
- Building the Model & Setting Line Data
- Clamp Weight Attachment & Data Model Setup
- Building the Model & Setting SHEAR 7 Data
- Building the Model & Setting VIVA Data
- Building the Model & Setting All Object Data
- Building the Model & Setting Tether Data
- Result Analysis of 8″ Pliant Wave Subsea Production Gas Riser Simulations
- Building the Model & Setting General Data
- Hydrodynamics Data Set Up
- Building the Model & Setting Vessel Data
- Building the Model & Setting Line Data
- Clump Weight Attachment & Data Model Setup
- Building the Model & Setting SHEAR 7 Data
- Building the Model & Setting VIVA Data
- Building the Model & Setting All Object Data
- Result Analysis of Single Point Mooring (SPM) Simulations
Hands On Workshop 5: Production Riser Installation Pull In Analysis (PIA) Simulations
- Building the Model & Setting General Data
- Hydrodynamics Data Set Up
- Building the Model & Setting Vessel Data
- Building the Model & Setting Line Data
- Clump Weight Attachment & Data Model Setup
- Building the Model & Setting SHEAR 7 Data
- Building the Model & Setting VIVA Data
- Building the Model & Setting All Object Data
- Result Analysis of Production Riser Installation Pull In Analysis (PIA) Simulations
Outcome
Participants will gain an in debt understanding of Subsea Structures Installation & Hydrodynamics Analysis with ORCAFLEX at Level 1 to Level 3.
They will also be able to function with minimum supervision as a Subsea Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.
Certificate of Completion
At the end of the course certificate of Completion Based on Scottish NVQ standard Level 4 & 5 shall be issued directly from Chess Subsea Engineering Europe.
How to Register
Contact [email protected] directly or watsapp us +2348151453146 for course registeration.
Chess Subsea Engineering is an international underwater subsea training, technical manpower supply and offshore engineering consultancy company, with proven competence in delivering results to client’s satisfaction. Our extensive experience with EPIC Contract Management, Renewable Energy, Big Data Statistical Analysis, Floating Production Storage & Offloading (FPSO) Unit, Drillships, Risers, Pipelines & Underwater Engineering services enable us to provide the clients with professional and cost effective solutions that stands out for their quality, enabling Oil Major as well as marginal E&P hit their production objectives.
As an innovative technology driven company; we are positioned to further strengthen our customers offerings both in CAPEX and OPEX overall cost reduction via digitalization of E&P deepwater subsea assets; utilizing machine learning, deep learning and artificial intelligence to accelerate deployment of new technologies and applications for overall system reliability and security.
Chess Subsea Engineering is a relatively young company – but the sum of our experience is substantial. Our employees have an average of more than 20 years of experience from the oil and gas industry globally. ...
Related Courses
