SCHEDULED PLANNED MAINTENANCE AND PREDICTIVE MAINTENANCE
Details
INTRODUCTION FOR SCHEDULED PLANNED MAINTENANCE AND PREDICTIVE MAINTENANCEF
There is a traditional attitude on the part of maintenance that all breakdowns are the same and are all equally bad. This acceptance of the status quo is now intolerable and unacceptable in maintenance. A breakdown should be viewed with an analytical eye to see what difference it Made to PQCSDM. Most failures are the result of deterioration which when left unattended, results in breakdown. As such a strong scheduled and predictive maintenance is a must if one wants to eliminate such unpredictable failures.
This program provides the required know-how for participants to understand how to implement both the time base concept and the condition Base concept of preventive maintenance.
OBJECTIVES
- To provide the insight of why equipments breakdown.
- To understand the real objectives of maintenance.
- Define why equipments deteriorate.
- How to use the time base schedule maintenance.
- How to use the condition base predictive maintenance.
- Strategize for zero unplanned equipment failures.
Outline
COURSE CONTENT
Module 1 : Introduction to “maintenance”
- Definition of good maintenance.
- Why equipment need maintenance.
- Why equipments keep failing.
- Equipment cost contribution to overall manufacturing.
- Objectives of good maintenance
- 8 zero breakdown strategy.
Module 2 : Introduction to scheduled maintenance.
- What is scheduled maintenance.
- Six life cycle of deterioration.
- Why current planned maintenance are not effective.
- 12 steps systematic planned maintenance.
Module 2.1 : Getting started for schedule planned maintenance.
- Step 1. determine the area of responsibility.
- Step 2. determine equipment criticality.
- Step 3. determine component criticality.
- Step 4. preparing necessary documents.
Module 2.2 : Prepare the checklist and determine schedule.
- Step 5. preparing planned maintenance checklist.
- Step 6. determine planned maintenance schedule.
Module 2.3. Executing the planned maintenance.
- Step 7. training the pm technician.
- Step 8. prepare tools and replacement parts.
- Step 9. performing the pm as per schedule .
- Step 10. buy off planned maintenance activity.
Module 2.4 : Assessing the planned maintenance effectiveness.
- Step 11. monitor and measure effectiveness using MTBF .
- Step 12. continuously improve pm effectiveness.
Module 3: Predictive Maintenance.
- Definition of predictive maintenance.
- Objectives of predictive maintenance.
- Myths about predictive maintenance.
- Why on-condition- monitoring.
- How to determine p-f curve
- what is p-f interval
- The PdM cycle.
Module 3.1 : Predictive Maintenance
Technique 1
- Physical monitoring.
- Spc type monitoring.
- Equipment efficiency monitoring.
- Quality effect monitoring.
- Productivity efficiency monitoring.
Module 3.2: Predictive Maintenance
Technique 2
- Dynamic monitoring.
- Particle monitoring.
- Chemical monitoring.
- Physical effects monitoring.
- Temperature effects monitoring.
- Electrical effects monitoring.
Schedules
Wed, Thu | 09:00 AM — 05:00 PM |
Platform: Zoom
No. of Days: | 2 |
Total Hours: | 14 |
OTC Training Centre Sdn Bhd is an innovation leader in the development and delivery of practical outsourcing training programs for the past 17 years. Since then, OTC has supported thousands of companies to upskills their employees with personalized content and learning solutions. Today, we have evolved to provide a full suite of outsourcing services in the learning and development field.
Our training programs are entitled to HRDCorp claim, with our trainers being certified by HRDCorp as well. As a training provider, we aspire to keep providing the best training to our respected clients to ensure their satisfaction while using our service as the training provider.